Thank you for visiting A 1 70 inch diameter hole 4 00 inches deep allowance of 0 90 inches is drilled in 1020 steel at a cutting speed of. This page is designed to guide you through key points and clear explanations related to the topic at hand. We aim to make your learning experience smooth, insightful, and informative. Dive in and discover the answers you're looking for!
Answer :
Final answer:
The cutting time to drill a 1.70 inch diameter hole, 4.00 inches deep in 1020 steel at a 300 fpm cutting speed with a feed of 0.03 ipr, is calculated to be 0.59 minutes.
Explanation:
The question asks to calculate the cutting time for drilling a hole in 1020 steel with given dimensions and cutting conditions. To do this, we must first determine the spindle speed in revolutions per minute (RPM) and then use the feed rate to find the time it takes to drill 4.00 inches deep.
First, we calculate the spindle speed using the formula Spindle Speed (RPM) = (Cutting Speed x 4) / (pi x Diameter). We have a cutting speed of 300 fpm and a diameter of 1.70 inches. Plugging these into the formula gives:
RPM = (300 x 4) / (pi x 1.70)
RPM = 224.86 (rounded to two decimal places)
Next, we calculate the cutting time using the feed rate and the depth of the hole. The formula for cutting time is Cutting Time (minutes) = Depth / (Feed x RPM). With a depth of 4.00 inches, a feed of 0.03 ipr, and RPM of 224.86, we get:
Cutting Time = 4.00 / (0.03 x 224.86)
Cutting Time = 0.59 minutes (rounded to two decimal places)
Hence, the cutting time to drill a 1.70 inch diameter hole that is 4.00 inches deep in 1020 steel at a cutting speed of 300 fpm with a feed of 0.03 ipr is 0.59 minutes.
Thank you for reading the article A 1 70 inch diameter hole 4 00 inches deep allowance of 0 90 inches is drilled in 1020 steel at a cutting speed of. We hope the information provided is useful and helps you understand this topic better. Feel free to explore more helpful content on our website!
- You are operating a recreational vessel less than 39 4 feet long on federally controlled waters Which of the following is a legal sound device
- Which step should a food worker complete to prevent cross contact when preparing and serving an allergen free meal A Clean and sanitize all surfaces
- For one month Siera calculated her hometown s average high temperature in degrees Fahrenheit She wants to convert that temperature from degrees Fahrenheit to degrees
Rewritten by : Jeany
