High School

Thank you for visiting The chart for a bender gives a take up of 8 inches for 1 2 inch RMC Rigid Metal Conduit The travel is 7 25. This page is designed to guide you through key points and clear explanations related to the topic at hand. We aim to make your learning experience smooth, insightful, and informative. Dive in and discover the answers you're looking for!

The chart for a bender gives a take-up of 8 inches for 1/2 inch RMC (Rigid Metal Conduit). The travel is 7.25 inches, and the gain is 3.25 inches.

Fill in the blanks:

- The total length of the conduit needed to form the bends shown is _______.
- The distance between the bending marks is ________.

Answer :

Final answer:

To find the total length of the conduit needed to form the bends shown, we need to calculate the number of bends and then use that to calculate the total length. The distance between the bending marks can be found by dividing the total length by the number of bends.

Explanation:

The take up of 8 in for 1/2 in rmc means that for every 8 inches of bending, the conduit will reduce by 1/2 inch. The travel of 7.25 and the gain of 3.25 indicate the distance between the bending marks after each bend. To find the total length of the conduit needed to form the bends shown, we need to calculate the number of bends using the formula:

Number of Bends = (Total Length of Conduit - Take Up) / Gain

Once we have the number of bends, we can calculate the total length of the conduit needed using the formula:

Total Length of Conduit = Number of Bends * Gain + Take Up

The distance between the bending marks can be calculated by dividing the total length of the conduit by the number of bends.

Thank you for reading the article The chart for a bender gives a take up of 8 inches for 1 2 inch RMC Rigid Metal Conduit The travel is 7 25. We hope the information provided is useful and helps you understand this topic better. Feel free to explore more helpful content on our website!

Rewritten by : Jeany

Other Questions