Thank you for visiting A 22 1 2 offset has been fabricated in a length of 1 inch RMC The left end of the conduit will be connected to. This page is designed to guide you through key points and clear explanations related to the topic at hand. We aim to make your learning experience smooth, insightful, and informative. Dive in and discover the answers you're looking for!
Answer :
Final answer:
The distance to the center-of-bend marks for a 22 1/2° offset in a 1-inch RMC, after incorporating two locknuts, is closest to 3 5/8 inches.
Explanation:
The question involves calculating the distance to the center-of-bend marks when fabricating a 22 1/2° offset in a length of 1-inch Rigid Metal Conduit (RMC) where the left end of the conduit will be connected to a box using two locknuts.
To determine the distance from the end of the conduit to the marks, use the bending multiplier for a 22 1/2° offset, which is 2.6. Multiply the outside diameter of the conduit by the bending multiplier: 1 inch * 2.6 = 2.6 inches.
To incorporate the thread length and locknuts (each 1/2 inch), we add an additional 1 inch (1/2 inch per locknut) to the measure. The total distance to the center-of-bend marks should therefore be 2.6 inches + 1 inch = 3.6 inches, which is closest to the measurement of 3 5/8 inches from the provided options, considering that 5/8 inch is approximately equal to 0.625 inches.
Thank you for reading the article A 22 1 2 offset has been fabricated in a length of 1 inch RMC The left end of the conduit will be connected to. We hope the information provided is useful and helps you understand this topic better. Feel free to explore more helpful content on our website!
- You are operating a recreational vessel less than 39 4 feet long on federally controlled waters Which of the following is a legal sound device
- Which step should a food worker complete to prevent cross contact when preparing and serving an allergen free meal A Clean and sanitize all surfaces
- For one month Siera calculated her hometown s average high temperature in degrees Fahrenheit She wants to convert that temperature from degrees Fahrenheit to degrees
Rewritten by : Jeany
