A 22 1/2° offset has been fabricated in a length of 1-inch RMC. The left end of the conduit will be connected to a box using two locknuts. Determine the distance from the end of the conduit to the two center-of-bend marks to fabricate this offset. Select the answer which indicates the correct distance to the marks.

(Note: Thread length = 1/2".)

Question

13-06-2024
Engineering

College

Thank you for visiting A 22 1 2 offset has been fabricated in a length of 1 inch RMC The left end of the conduit will be connected to. This page is designed to guide you through key points and clear explanations related to the topic at hand. We aim to make your learning experience smooth, insightful, and informative. Dive in and discover the answers you're looking for!

A 22 1/2° offset has been fabricated in a length of 1-inch RMC. The left end of the conduit will be connected to a box using two locknuts. Determine the distance from the end of the conduit to the two center-of-bend marks to fabricate this offset. Select the answer which indicates the correct distance to the marks.

(Note: Thread length = 1/2".)

Answer :

Other Questions

Which of the following is an example of an ethical argument? A.

texas is somewhat unique in that it is _____.

The activation energy for the uncatalyzed reaction, A → C, is 38.2

What practice provides the lowest risk of cross-contact when preparing food for

**Product Line Financial Summary** | Product Line | Total Sales | Total

When people unquestionably accept what their own personal judgment tells them about

Which of these songs made the most use of "studio effects"? A.

Standard atmospheric pressure: \[1 \text{ atm} = 101.3 \text{ kPa}\] The gas

Fine the value of x a.) 40.2 b.)33.1 c.) 38.4 d.) 36.6

This question has two parts. First, answer Part A. Then, answer Part

Which statement about road rage is true? A. It is rarely associated

What does the acronym EPIC represent regarding an epic hero? A. It

Why was Sam Tatum tarred and feathered? Although this was a terrible

A food web explains why there are more _____ because more energy

From an economic point of view, India and China are somewhat similar:

hrrendera hrrendera · Answer 1 · 2024-07-07T18:08:35-04:00

Final answer:

Without the specific bend multiplier or shrinkage factor for a 22 1/2-degree bend in 1-inch RMC, an exact answer for the distance from the end of the conduit to the center-of-bend marks cannot be provided.

Explanation:

When calculating the distances from the end of the conduit to the center-of-bend marks for a 22 1/2° offset in a length of 1-inch RMC, we should consider the properties of the conduit bending process, specifically the bend radius and the degrees of bend needed. Given that the degree of offset is 22 1/2°, the formula for finding the spacing between bends (multiplier factor) would generally be applied, which is typically derived from a conduit bending guide or an electrician's handbook. However, without the specific multiplier factor or the shrinkage factor for a 22 1/2° bend, we cannot provide an exact answer. Since the thread length is 1/2", this measurement should be considered in the overall length when attaching the conduit to a box with two locknuts.

First, we need to calculate the length of the offset. Since the offset is 22 1/2°, we can divide 360° by 22 1/2° to determine the number of bends needed to complete one full rotation. This gives us 16 bends.Next, we need to calculate the distance between each bend. Since the offset is 1 inch, we can divide 1 inch by 16 to determine the distance between each bend. This gives us 1/16 of an inch or 1/32 of a foot between each bend.