Thank you for visiting When bending a 13 inch offset using 45 bends in 1 inch RMC what multiplier rounded to the nearest tenth would be used to determine. This page is designed to guide you through key points and clear explanations related to the topic at hand. We aim to make your learning experience smooth, insightful, and informative. Dive in and discover the answers you're looking for!
Answer :
Final answer:
For a 13-inch offset with 45-degree bends in 1/2-inch RMC, the multiplier is 1.4. Multiplying 13 inches by 1.4 gives the distance between bends as 18.2 inches. Therefore, the correct answer is option A.
Explanation:
When bending a 13-inch offset using 45-degree bends in 1/2-inch RMC (rigid metal conduit), you would use a multiplier to determine the distance between the bends. A commonly used and taught rule in electrical work, known as the 45-degree bend multiplier, sets the multiplier for 45-degree bends at 1.4 (option a). Therefore, to calculate the distance between bends for a 13-inch offset, you would multiply 13 inches by 1.4 to get the distance between the bends, which would be 18.2 inches when rounded to the nearest tenth.
Thank you for reading the article When bending a 13 inch offset using 45 bends in 1 inch RMC what multiplier rounded to the nearest tenth would be used to determine. We hope the information provided is useful and helps you understand this topic better. Feel free to explore more helpful content on our website!
- You are operating a recreational vessel less than 39 4 feet long on federally controlled waters Which of the following is a legal sound device
- Which step should a food worker complete to prevent cross contact when preparing and serving an allergen free meal A Clean and sanitize all surfaces
- For one month Siera calculated her hometown s average high temperature in degrees Fahrenheit She wants to convert that temperature from degrees Fahrenheit to degrees
Rewritten by : Jeany
